13
3.
Recheck the strap alignment at
the rear of the tool and realign if
necessary. Release the tension
motor.
Press down the Green Tension
Control Lever to begin
tensioning the strap.
When the tension motor stalls, indicating completion of tension, release the control lever. The
strap will remain tensioned around the package.
NOTE: If the strap alignment is unsatisfactory or the tool needs to be removed before sealing.
Remove the tool as described in Step 5 of these instructions.
4.
Press the Blue Sealer Control
lever to begin the sealing cycle.
It is not necessary to continue
holding the lever down once
the weld cycle has started.
Summary of Contents for VT-16
Page 1: ...VT 16 19 TENSION WELD STRAPPING TOOL...
Page 5: ...5 MAJOR COMPONENTS...
Page 19: ...19 BLANK...
Page 25: ...25...
