AFTER SALES SUPPORT
1300 777 137
MODEL: EA2258 PRODUCT CODE: 709435 07/2022
25
OTHER USEFUL INFORMATION
Cleaning and Maintenance
Your Laser Range Finder is a precision measurement device. Follow these
guidelines to keep your Laser Range Finder in the best condition.
• When you are not using the Laser Range Finder, it is recommended to pack
the Laser Range Finder away in its pouch and carton, for safer storage.
• The Laser Range Finder is likely only to require regular “dusting” to keep it clean.
Use the supplied cleaning cloth or standard duster, to remove the dust from the
Laser Range Finder. Clean the dust from the Laser Range Finder regularly.
• If the Laser Range Finder becomes soiled with anything other than dust on
its exterior, clean the exterior of the Laser Range Finder by wiping over the
surface with a slightly damp cloth and then polish with a soft dry cloth.
• Occasionally, dust and/or moisture may build up on the laser emitting lens, laser
receiving lens and eyepiece of your Laser Range Finder. Special care should be
taken when cleaning any optical instrument so as not to damage the optics. Only
use the cleaning cloth (supplied with the Laser Range Finder) to clean the laser
emitting lens, laser receiving lens and eyepiece. Be careful that you do not apply
too much pressure as there is a risk that you may damage the sensitive parts.
• It is recommended to clean all 3 lenses of the Laser Range Finder regularly
with the cleaning cloth (supplied).
NOTE: Only use the cleaning cloth (supplied) to clean the Laser Range Finder
lenses. Using other cleaning cloths may damage the lenses.
• Do not use detergents or abrasive cleaners, and do not allow moisture, water
or other liquid to enter the Laser Range Finder.
• It is not recommended to use any cleaning agents on the laser emitting lens,
laser receiving lens or the eyepiece. However, if required, fingerprints and
organic materials on the laser emitting lens, laser receiving lens or eyepiece
can be removed using a solution of 3 parts distilled water to 1 part isopropyl
alcohol. Use soft, white facial tissues to apply the solution and make short,
gentle strokes. It is recommended to change the tissue often.
CAUTION: Do not use scented or lotioned tissues. These types of tissues may
damage the optics.
