AFTER SALES SUPPORT
1300 777 137
MODEL: EA2258 PRODUCT CODE: 709435 07/2022
13
INSTRUCTIONS (CONT.)
1. Put your dominant hand through the
wrist strap and firmly grip the Laser
Range Finder. Bring the eyepiece to
your eye and point the Laser Range
Finder at a distant object. If the object
is not clear in your field of vision, then
rotate the eyepiece of the Laser Range
Finder until the object becomes clear.
2. Press down the OPEN button. The
lens will display “
”, which are the
crosshairs (see Fig. 2.1). If the lens
displays a different mode, then press
the MODE button till you reach the
Ranging Mode display.
3. Press and hold down the OPEN button till the
word Scan comes up on the display under the
crosshairs which are now flashing (see Fig.
3.1). Continue holding down the OPEN button
and gradually point the Laser Range Finder
at different objects. For each object (within
the Laser Range Finder measuring range), the
distance to the object will be displayed on the
lens (see Fig. 3.2 and Fig. 3.3).
4. To ensure accuracy, hold the Laser Range Finder with a firm grip and keep it
steady till the measurement is displayed.
5. The default unit of measurement is M (Metres). To change the unit of
measurement to Y (Yards), return to the Ranging Mode by releasing the OPEN
button and then hold down the MODE button. To switch between the two
units keep holding down the MODE button. Once the unit of measurement
desired is selected, release the MODE button and hold down the OPEN button
to return to Scanning Mode.
WARNING: Please always pass your hand through the wrist strap prior to
gripping the Laser Range Finder to avoid it from dropping and getting damaged.
NOTE: The Scanning Mode runs for maximum time of 30 seconds in each cycle
after which the Laser Range Finder returns to the Ranging Mode. This is to make
sure that not much strain is caused to your pressing finger. To return to the
Scanning Mode once again, simply hold down the OPEN button in Ranging Mode.
Fig. 3.2
Fig. 3.3
