Menu
–Press to access the receiver menu. Press the button again to exit.
OK
– In viewing mode, press to enter playback interface for recorded videos.
Navigation/OK
– Use the buttons to control the receiver in Quad Mode, Menu Mode and Playback
mode.
- Quad Mode:
In quad mode, press a navigation button to view the image from the corresponding
camera in full screen mode.
- Menu Mode:
Use the navigation buttons to navigate in Menu Mode. Press the
OK
button to confirm the
menu selection.
- Playback Mode:
In playback mode, use the navigation buttons to play/pause, stop, forward, backward,
etc.
Del
– Press the button to delete
recorded files from SD card in playback
interface.
7. Button Lock Switch
– Slide the
switch to right side to lock the buttons on
receiver.
8. SD Card Slot
– Insert SD card to this
SD card slot for both video and audio
recording.
Wireless Receiver Installation
1. Before receiver installation, choose one installation method from below 2 methods:
1). Desktop or table stand.
For this method, you only need to place the receiver on a desktop or a table.
2). Hung on the screw which is fixed on a wall.
Decide where to hang the receiver first. Make sure the range between the position and the nearest
power output port is no more than 5 feet. Also, the range between the position and TV or VCR/DVR
should be no more than 5 feet.
Drill two holes on the wall where you decide to hang the receiver. Insert a plastic anchor to each hole
and fix a screw into the plastic anchor. Now the receiver can be hung on the screws.
2. After the receiver is well positioned, plug the AC adaptor power output cable into the 9V DC input of
the receiver, and plug the power plug into a wall outlet or surge protector.
3. Connect one end of the included AV cable to the AV output of receiver, and connect the other end to
the Video IN (Yellow) and Audio IN (White) ports on the TV, VCR or other viewing/recording devices.
The receiver installation is now completed.
3
