A(mm) B(mm) C(mm)
D
E
760
50 mini
20 mini
Air intake
Air exit 5mm
Before installing the hob
-
The work surface is square and level, and no structural members
interfere with space requirements.
-
The work surface is made of a heat-resistant material.
-
If the hob is installed above an oven, the oven has a built-in cooling
fan.
-
The installation will comply with all clearance requirements and
applicable standards and regulations.
-
A suitable isolating switch providing full disconnection from the
mains power supply is incorporated in the permanent wiring,
mounted and positioned to comply with the local wiring rules and
regulations.
-
The isolating switch must be of an approved type and provide a 3
mm air gap contact separation in all poles (or in all active [phase]
conductors if the local wiring rules allow for this variation of the
requirements).
-2
2