58
58
HOW TO DISASSEMBLE AND ASSEMBLE
5. HANDLE
6-1. DISPENSER DISPLAY
1) HANDLE REMOVAL
·
To move the refrigerator through
a house door, it may be necessary
to remove the refrigerator door handles.
Note
:
·
Handle appearance may vary from
illustrations on this page.
·
Loosen the set screws with a 2.5mm (3/32”)
Allen wrench and remove the handle.
Note
:
·
If the handle mounting fasteners need to
be tightened or removed, use a 1/4"
Allen wrench.
·
Place the handle on the door by aligning
handle footprints to fit mounting fasteners
and tighten the set screws with a
2.5mm (3/32
”
) Allen wrench.
2) HANDLE REINSTALLATION
Note
:
·
If the handle mounting fasteners need to
be tightened or removed, use a 1/4"
Allen wrench.
2) Separate housings and remember the pair to prevent
Miss assembly.
1) As below picture, separate part
①
from unit and Pull part
②
3) Loosen four screws pointed in red, separate one
housing, separate water-supply-pipe from hook.
Mounting
Fasteners
Mounting
Fasteners
Set Screw
Allen Wrench
①
②
