55
55
HOW TO DISASSEMBLE AND ASSEMBLE
3. F - Door
1) Remove both side of screw, and separate lower cover.
2) Disconnect the water tube to the dispenser (Blue
Tubing).
3) Loosen the ground screw pointed in red
4) Use offset rachet driver for loosen two screws in red
7) Pull the lead wire cover coming from the bottom of the
door.
10) Close the door.
11) Remove the top cover.
12) Loosen the bolts in red
14) Raise the F-door and remove it.
15) Loosen two screws bottom of the F-door.
16) Split lead wire cover.
5) Open the Freezer door to full fully opened position
(130 degrees)
6) Loosen screw in red with rachet or small driver.
8) Separate housing supporter.
9) Disconnect the all wire coming from the bottom of the
door.
CAUTION
- Do not discard the connector or the cover for the
water tubing an wires. Hold these for use when reinstalling the
door.
CAUTION
- Do not loosen the bolts in yellow.
Another worker hold the F-door.
13) Remove the upper bracket.
CAUTION
- Before remove the door, remove the foods on the
shelfs and empty the ice bucket.
CAUTION
- Work space is limited, so use a small screw or a
rachet.
