56
4-1. R - Door, adjustment top and bottom.
3-2. F - Door, adjustment Right and left.
4. R - Door
4) After adjustment, Tightening the hexnut located at
the bottom of lower hinge.
3) To modify the level difference right and left, use the
adjust - bolt marked in red.
1) Remove the top cover.
2) Loosen the 4 bolts of F - upper hinge by vox wrench
counterclockwise 4~5 times.
Do not loosen the bolts marked in yellow.
4) After modify the level difference right and left,
Tightening the 4 bolts of F - upper hinge.
1) Remove the both sides of the screw at Lower cover. And
remove lower cover.
5) To remove R - door, lift up R - door.
**Assembly is reverse order.
2) Remove the top cover. See the previous page.
3) Remove the machine cover. See the previous page.
4) Remove 4 bolts marked in red. Do not loosen 3 bolts
marked in yellow.
1) Loosen the hex
① nut at the bottom of the lower
hinge below R - door.
CAUTION
- Use small driver, Ratchet or vox wrench.
Adjust Bolt
CAUTION
- Please remove all food on the shelf before
removing the door.
56
HOW TO DISASSEMBLE AND ASSEMBLE
Bolt
Bolt
Screw
Screw
3-1. F - Door, adjustment top and bottom.
1) Loosen the hexagon nuts located in the bottom of the
lower hinge below F-door.(
①
)
2) Loosen or tightening the hex wrench into
② to adjust
the door top and bottom.
3) To raise the door, turn the nut toward ③ direction.
To drop the door, turn the nut toward ④ direction.
①
②
③
④
NUT
③
①
④
②
Nut
2) By loosen or tight the nut at
②
by hex wrench, adjust the
level difference of top and bottom.
3) To raise door turn toward
③ direction, To drop door
turn toward ④ direction.
4) After adjustment, tighten the hex nut at the bottom of
lower hinge.
