background image

33

INSTALLATION INSTRUCTIONS

ENGLISH

Preparing the Installation Location

Important Installation Information

 

All electric cooktops run off a single phase, three-wire or four-wire cable, 240/208 volt, 60 hertz, AC-only 
electrical supply with ground.

 

Minimum distance between cooktop and overhead cabinetry is 30” (762 mm).

 

Make sure the cabinets and wall coverings around the cooktop can withstand the temperatures (up to 93˚C 

[200˚F]) generated by the cooktop.

CAUTION

To eliminate the risk of burns or fire by reaching over heated surfaces, cabinet storage space located above 
the cooktop should be avoided. 
If cabinet storage is provided, risk can be reduced by installing a range hood that projects horizontally a 
minimum of 5" (127 mm) beyond the face of the cabinets.

1. Standard Installation

30" min.

(762 mm)

Radius

36 5/8" 

(930 mm)

33 7/8" 

(860 mm)

21 1/16"

(535 mm)

19 5/16"

(490 mm)

3/8"

(10 mm)

3 9/16" 

(91 mm)

3 9/16" 

(91 mm)

Height of conduit: 1 1/8" 

(29 mm)

2 7/16" 

(62 mm)

4" x 8" 

(102 mm x 203 mm) 

opening to

route armored cable if panel is present

34 3/8"

(873 mm)

24" 

(610 mm)

19 13/16" 

(503 mm)

2 3/16" min. 

(55 mm)

2 1/16" min. 

(52 mm)

4 1/4"

(108 mm)

1 1/8" min.

(28 mm)

Do not obstruct these areas!

36 inch Induction Cooktop

Summary of Contents for Q50941E













































Reviews: