SignaMax 065-7851, User Manual

Page: 79 / 365

Publication date:March., 2011
Revision A1
77
3-3-3. Port-based Group
Function name:
Port-based Group Configuration
Function description:
It shows the information of the existed Port-based VLAN Groups. You can
easily create, edit and delete a Port-based VLAN group by pressing
<Add> ,
<Edit> and <Delete> function buttons. User can add a new VLAN group by
inputting a new VLAN name.
Fig. 3-21
Parameter description:
VLAN Name:
The name defined by administrator is associated with a VLAN group.
Valid letters are A-Z, a-z, 0-9, “
-
“ and “_” characters. The maximal
length is 15 characters.
Member Port:
This is used to enable or disable if a port is a member of the new added
VLAN, “Enable” means it is a member of the VLAN. Just tick the check
box (
)
beside the port x to enable it.
Add new VLAN:
Create a new Port-based VLAN. Input the VLAN name and choose the
member by ticking the check box beside the port No., then, press the
<Apply>
button to have the setting taken effect.
Fig. 3-22