Signamax 065-7840 24-Port 10/100/1000BaseT/TX Managed Switch
36
3-1-3. Time Configuration
The switch provides manual and automatic ways to set the system time via
NTP. Manual setting is simple; just input “Year”, “Month”, “Day”, “Hour”, “Minute” and
“Second” within the valid value range indicated in each item. If you input an invalid
value, for example, 61 in minute, the switch will clamp the figure to 59.
NTP is a well-known protocol used to synchronize the clock of the switch
system time over a network. The version of NTP, an internet draft standard
formalized in RFC 1305, that has been adopted on the system is version 3 protocol.
The switch provides four built-in NTP server IP addresses resident in the Internet
and a user-defined NTP server IP address. The time zone is Greenwich-centered
which uses the expression form of GMT+/- xx hours.
Function name:
Time
Function description:
Set the system time by manual input or set it by syncing from Time servers.
The function also supports daylight saving time for a different area’s time
adjustment.
Parameter description:
Current Time:
Show the current time of the system.
Manual:
This is the function that adjusts the time manually. By filling valid figures
in the fields of Year, Month, Day, Hour, Minute and Second respectively
and pressing the
<Apply>
button, time is adjusted. The valid figures for
the parameter Year, Month, Day, Hour, Minute and Second are >=2000,
1-12, 1-31, 0-23, 0-59 and 0-59 respectively. If you input the wrong
figure and press the
<Apply>
button, the device will reject the time
adjustment request. There is no time zone setting in Manual mode.
Default: Year = 2000, Month = 1, Day = 1
Hour = 0,
Minute = 0,
Second = 0
