Signamax 065-7530/065-7540 Full-Duplex Switches
20
Switch Configuration
Setting up the Console Port
Connection
To configure these features through the console port, it is
necessary to first configure a terminal emulation program
in DOS or in Windows, such as HyperTerminal.
Check the switch, cables, and computers for proper
installation before configuration.
Attach a PC or any VT100 compatible terminal to the
console port on the back of the switch (see figure 7)
using the following settings:
Terminal Type
VT100
Port Type
(COM 1~4)
Communication
Mode
8 data bits, 1 stop bit, no parity
and 9600bps
(for initial configuration)
Flow Control
None
Hardware
Compression
NA
Figure 7. Console Port
Console Port
