Signamax 065-7530/065-7540 Full-Duplex Switches
Switch Configuration
25
Configure VLAN Groups
Virtual Local Area Networks (VLANs) enable segmenting
of the LAN without regard to physical location. Assign
each port to a VLAN group or set of groups according to
accessibility needs. Thus, a specific port could be in
more than one VLAN group.
This switch is able to support up to four port-based
Virtual LAN (VLAN) domains. Follow these steps to
assign ports to a VLAN group.
•
Enter
[V]
from the Main Menu
•
Select a VLAN group:
[V1]
,
[V2]
,
[V3],
or
[V4]
•
Enter the port #.
Note: If entering more than one port to a VLAN group,
separate each port # by commas without spaces.
Only one VLAN group can be defined at a time. Repeat
selecting VLAN groups and assigning ports until all ports
are assigned to at least one VLAN group. Though each
VLAN grouping does not need to be utilized, each port
must be assigned to at least one VLAN group. Hit the
[ESC]
key when done.
To return to the default settings (in which each port is
assigned to V1), enter
[D]
from the main menu. A prompt
appears to verify this action.
