TECHNICAL DESCRIPTION AND OPERATING MANUAL ST131 <PIRANHA II> and ST131N
27
3.5 “MEMORY” SUB-MODE
This sub-mode is intended for storage of screen image in non-volatile memory of the device and
subsequent indication of:
•
screen
images;
• selected signal;
• results of work in the "AUTOMATIC ANALYSIS" sub-mode.
It is possible to transfer stored data to a PC in form of individual files and integrate
them into special software «ST131 Analyzer Pro» (see "ST131 Analyzer Pro. User’s
manual»).
After pressing the shortcut
context buttons are changed to the following:
- save image.
- get list of saved image.
- save the signal under the marker.
- get list of stored signals.
3.5.1 WORK WITH SCREEN IMAGES
To save the display picture, press
, enter the digital identity of record or press
and
check the appearance of short inscription "Data is written! XX.XX-YY.YY», where X and Y - the initial
and final frequency of the stored spectrogram.
Screen images are stored sequentially in the current group. Groups are formed according to the
current CHANNEL and MODE of operation.
To call a stored image, press
. After the list
appearance (Figure 27) selection of the desired image performed
by buttons
and
, then confirm your selection by pressing
.
You can upload only these images that relate to the channel
and mode in which the device it used.
CONTEXT BUTTON FUNCTIONS ______________________________________________
- go to the display of the selected frequency range.
- removes the selected item from the list and memory.
- deletes the entire list from memory.
___________________________________________________________________________________
Figure 27
