41
Check if the reading value of the pressure is normal (normally the value of the negative
pressure reads -‐4.0kPa and various slightly in different models or locations). The pressure can
be adjusted by the air regulator or by the TOPJet software from 2017 models.
Activate the air blower and turn on the corresponding suction sector of the platform where
the media is laid.
Activate the UV lamp and carry on to the normal printing job.
1.2 Printer shutdown operation
Step one. Print the nozzle check on an A4-‐size paper and compare with the previous one. It any
abnormality such as nozzles missing is observed, the priming and exhausting operation should be
executed immediately till you can get a printed result as the same as the previous sample, then
keep it for reference for history reports
Step two. Turn off the activating button of the air blower.
Step three. Verify that the negative pressure reads normally and the automatic spray function is
activated. Put the Topjet software into the “sleep mode”
Clean the baseplate of the carriage and clean printer and the workplace.
Check the Signracer shotdown procedure document for different shutdown procedure times.
Summary of Contents for 1600 LED
