6
2. Precautions of operations
Caution
Please supply the printer with rated voltage and frequency, improper power input may cause
functional abnormality or damage to the printer.
Any unauthorized alteration is strictly prohibited
,
or it might cause parts malfunction or damage to
the printer.
Never use the printer in a non-‐ventilated or stuffy workplace, or it may lead to toxic hazards to
operators. A ventilator is always a necessity.
Any disassembly or replacement of the parts and cables is strictly prohibited in the state of
power-‐on.
Avoid any body contact with the moving parts in the process of printer working, or it may lead to
equipment breakdown or personal injury.
The printer is a precision equipment and should always avoid strong impact or shake in any process
of loading, installation and operation, or it may result in equipment damage.
Avoid any liquid spilled on the electronic parts or it may result in parts malfunctions.
Keep the chemical consumables away from non-‐qualified individuals and stored according to the
specific local instructions.
Avoid setting foot or heavy items placed on the printer or it may result in equipment damage.
Verify that the printer is properly ground wired or it might cause some electric shock risks.
The operator must be well-‐properly trained and should operate the machine under the
instructions, or it may easily cause equipment damage or personal injury.
Always remember to press the scram stop at any emergency, and the printer should not be
activated until all the malfunctions are settled.
Avoid eye-‐contact with the ultra-‐violets of the lamp.
In case that any chemical liquid spilled on human body, flush with adequate purified water
immediately and see a doctor afterwards.
Verify that there is no individual or item within the printing area.
The treatment of the waste chemicals should comply with local environment regulations.
Summary of Contents for 1600 LED
