SIGMATEK SDM 081, Operating Manual

Page: 36 / 37

SDM 081 S-DIAS SAFETY DIGITAL MIXED MODULE
Page 34 07.02.2022
Documentation Changes
Change date Affected
page(s) Chapter Note
18.07.2014 17 5 Connector Layout Added wiring notice
08.09.2014 15 3.8 Miscellaneous Added Standard
30.01.2015 20 6.2 Note Added note concerning connecting the S-DIAS
module while voltage is applied
26.03.2015 18 5.2 Applicable Connectors Added connections
07.05.2015 New writing: EN ISO 13849-1/-2
18.05.2015 15 3.9 Environmental Conditions Expanded vibration resistance
08.07.2015 13 3.7 Output Specifications Added mnemotechnic verse
04.08.2015 Info Cover Translation from German added
28.08.2015 15 5 Connector Layout Changed Notice in grey box
17.02.2016 13 3.4 Switching-off inductive loads
18.02.2016 16 5 Connector Layout Graphics changed
28.04.2016 24 7 Mounting Graphics distances
13.03.2017 12 3.2 Signal Output
Specifications for Cross-
Circuit Detection Note added
15.05.2017 14 3.4.1 Maximum Inductive
Load L (mH) at Load Current
I (A)
3.4.2 Maximum Capacitive
Load C (µF) at Load Current I
(A)
Chapter added
Chapter added
17.08.2017 17
20
3.8 Environmental Conditions
5.2 Applicable Connectors
Pollution Degree
Sleeve length added
Added info regarding ultrasonically welded strands
23.08.2017 13 3.4 Output Specifications Table expanded, Cutoff Test Pulse Timing added
30.08.2017 13 3.1 Output Specifications Cutoff Test Pulse Timing
18.10.2017 22
26
5.3 Label Field
7 Mounting
Added chapter
Graphic replaced
20.09.2018 5 Connector Layout Note added