SIGMATEK PIM 041-W Operating Manual Download Page 7

Page: 7 / 36

PANEL INTERFACE MODULE

PIM 041-W

2 Basic Safety Guidelines

2.1 Symbols Used

The following symbols are used in the operator documentation for warning and danger
messages, as well as informational notes.

DANGER

Danger

indicates that death or serious injury

will occur

, if the specified

measures are not taken.

To avoid death or serious injuries, observe the all guidelines.

Danger

indique une situation dangereuse qui, faute de prendre les

mesures adéquates,

entraînera

des blessures graves, voire mortelles.

Respectez toutes les consignes pour éviter des blessures
graves, voire mortelles.

WARNING

Warning

indicates that death or serious injury

can

occur, if the specified

measures are not taken.

To avoid death or serious injuries, observe the all guidelines.

Avertissement

d’une situation dangereuse qui, faute de prendre les

mesures adéquates,

entraînera

des blessures graves, voire mortelles.

Respectez toutes les consignes pour éviter des blessures
graves, voire mortelles.

14.04.2021

Page 5

Summary of Contents for PIM 041-W





































Search results

Summary of Contents for PIM 041-W

Reviews:

Related manuals for PIM 041-W

Brands by name

Popular brands

SIGMATEK PIM 041-W, Operating Manual

Search results

Summary of Contents for PIM 041-W

Reviews:

Related manuals for PIM 041-W

Brands by name

Popular brands