PANEL INTERFACE MODULE
PIM 041-W
13 Modularity
INFORMATION
The device is not Hot-Plug capable and can be damaged when the
supply is not disconnected before inserting or removing the PIM.
Always disconnect the supply before inserting or removing.
13.1 Removing the PIM from the Touch Panel
CAUTION
This product is a sensitive electronic device. When mounting, as
well as dismantling, note that you come into contact with ESD-
sensitive areas of the device.
The applicable ESD measures must be taken!
To remove a PIM from a TP, follow the steps below:
1. Ensure that an ESD-compliant working
method is followed (ESD armband, ESD
clothing).
2. Disconnect the device from the supply.
3. Place the TP flat on its back.
4. Loosen the 4 screws with a TX10
screwdriver.
14.04.2021
Page 29
