SC40401-K10-15002A
2nd
8
Copyright 2018, SIGMAKOKI Co.,Ltd.
1) POWER LED
：
Lights up when powered.
2) Emergency Stop Connector
：
It connects with Emergency Stop Switch. Please refer to
「
4-3 Emergency
STOP
」
for further details.
3) USB Connector
：
When control by USB Interface(Serial) through PC, please use USB.
4) ETHERNET Connector
：
In case of connection through Ethernet from PC, connect with using
straight or cross LAN cable.
5) OPTION Connector
：
When control by JS-300/ JB-400 or JD-100.
※
)About the usage of OPTION(JS-300/JB-400/JD-100), confirm various
User’s manuals.
6) I/O Connector
：
It interfaces with input/output signal for external devices.
7) FG Terminal
：
It is Terminal for Frame Ground. Please connect to Earth in the actual
environment.
8) Power Supply Terminal
：
Supply Power (DC +24V 1.4A)
9) DRIVER Connector 1
～
4
：
Connects to the cable attached to the Driver/ Servo-pack in use.
For your own safety, make sure POWER is OFF before connecting every cable.
Make sure to set up and wire the cable supplying DC+24V and FG_GND to the PGC-04-U so
that the maximum length of cable is not longer than 2m.
Power supply, use a DC power supply with primary side and the secondary side is reinforced
insulation.
In addition, wire the power supply separate from the motor drivers and servo -pack.
