manualshive.com logo in svg

Sigma Sigma 3-16KL, Operating Manual

Share
Download
Sigma Sigma 3-16KL Operating Manual Download Page 38

Refrigerated Centrifuge Sigma 3-16KL 
Refrigerated Centrifuge Sigma 3-16KL IVD 

 

6 Using the centrifuge 

 

 

 

38 

Version 03/2014, Rev. 2.6 of 06/11/2015 • sb 

Translation of the original operating manual, part no. 07050 

 

Pos: 139  /10 0 Sigm a/10 0 BA Z entrif uge n Sigm a (Sta nda rd mod ule)/ 060 B etrie b_Spinc ont rol L +S/Spinco ntr ol L  (Ze nt6 )06 0-0 030 -00 20- 0090   Besc hleuni gun gs-  und B remsk urv en @  27\ mod _14 053 1928 137 2_6 8.d ocx @  1928 29  @ 4 @  1 

 

6.3.2.5  Acceleration and deceleration curves 

 
Acceleration  

This function is used to select an acceleration curve. The system offers 10 
fixed, programmed acceleration curves (curves 0-9).  
 

Brake 

This function is used in order to select a curve that decelerates the 
centrifuge to a standstill. Deceleration curves are inverted images of the 
acceleration curves and are labelled with identical numbers. Deceleration 
curve no. 0 represents a brakeless deceleration. 

 

 

Fig. 19: Preselection of a curve; here: preselection of an acceleration curve 

 

 

NOTE 

Details concerning the acceleration and deceleration curves can be found 
in . 

 

 

Pos: 140  /01 0 Univ ersal mod ule/L eerz eile @  0\m od_ 120 211 624 450 0_0. docx @  11 4 @   @ 1 

 

 

Pos: 141  /10 0 Sigm a/10 0 BA Z entrif uge n Sigm a (Sta nda rd mod ule)/ 060 B etrie b_Spinc ont rol L +S/Spinco ntr ol L  (Ze nt6 )06 0-0 030 -00 20- 0100   Aut omatis che D eckelö ffnu ng @  27\ mod _14 053 192 838 31_ 68.d ocx @  192 857  @ 4 @  1 

 

6.3.2.6  Automatic lid opening function ("AutoOpen") 

The automatic lid opening function must be activated so that the lid opens 
automatically at the end of the operation. 
In order to activate the automatic lid opening function: 
•  Select the "Auto Open" symbol with the cursor and confirm the 

selection. The symbol and the bar under the symbol start to flash. 

•  Activate the function by turning the function knob. The symbol remains 

displayed in a permanent manner and the bar continues to flash. 

•  Turning the function knob further will deactivate the function. In this 

case, the symbol disappears but the bar continues to flash. 

•  Press the function knob in order to activate the desired setting. The bar 

remains visible as long as the cursor is placed over the symbol. 

 

 

Fig. 20: The automatic lid opening function "Auto Open" is activated 

Pos: 142  /01 0 Univ ersal mod ule/Seit enwec hsel @  0\m od_ 120 211 624 4312 _0. docx @  10 5 @  @  1 

 

 

Summary of Contents for Sigma 3-16KL















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands