Sigma CYBER 5500 II DVI, User Manual

Page: 7 / 29

7
Chapter
2 Installation
Installation of display drivers
Windows 98
In case of installing the SIGMA CYBER 5500 with Windows 98
If you have installed Windows 98 newly, your system recognizes the video card as “standard PCI
graphics adapter”. If it has not been set correctly, switch display to “standard PCI graphics
adapter and proceed the following procedures.
1. Insert the installation CD into the CD-ROM Drive.
2. Click the right mouse button on the Windows screen and select “properties” on the
dialog box.
3. Select “ settings” in “Display properties”.
4. Click “advanced”, “Adapter” then “Change”.
5. “Device driver update wizard” appears then click “next”.
6. Select your CD-ROM drive and locate WIN9X folder then click “O.K”.
(ex, D:\CYBER5500\WINX)