Sigma CYBER 5500 II DVI, User Manual

Page: 11 / 29

11
Windows 2000
In case of installing Windows 2000 in your system that has the SIGMA CYBER 5500 DVI
When you install Windows 2000 in condition that the SIGMA CYBER 5500 DVI has been
installed, Adapter type is set to “VGA”. You can find ‘Video controller (VGA compatible) in
“Other device” in ‘Device manager’
1. Insert the installation CD into your CD-ROM Drive.
2. Click the right mouse button on the “My Computer” and select “properties”.
3. Select “hardware” tab and click “Device manager” then the device manager dialog box and
Video controller (VGA compatible) in “Other devices” appear.
4. Select “Video controller (VGA compatible)” and then “Properties”.
5. Select “Driver’ tab and click “Driver update”.
6. “Driver upgrade wizard” or ‘New hardware search wizard” appears. Then click “Next”.
7. Select “Search for the best driver for your device (recommended)” and click “Next”.
8. Select “Specify location”, click “Next” and “Browse”. Select “CYBER5500\WIN2000” folder
on the Installation CD when the browse dialog box appears and click “Open”.
9. When you click “O.K”, the location of the INF file appears. Click “Next”.
10. If the driver has not been certified by WHQL, “Can not find the digital signature” dialog box
appears. Click “Yes” to proceed.
11. A message that the driver has been installed successfully appears. Then click “Finish”.
It will prompt you to restart your computer, click “Yes” to restart your computer to complete
the installation.