13
Windows NT4.0
1.
Start Windows NT4.0.
2.
Insert the installation CD into your CD-ROM Drive.
3. Click the right mouse button on the Windows screen and select “properties” on the dialog
box.
4.
The “display properties” dialog box appears. Click “display type” on “Settings”.
5. Select “Change” in the “adopter type”. “Display change” dialog box appears. Then click
“Have Disk”.
6. Click “Browse” to select the path of the display driver for Windows NT. Select ‘nv4_disp’ of
‘NT 40’ in ‘
Cyber 5500’
folder and ‘Open’.
7.
Confirm the path is entered and click “OK”.
8.
If it recognizes Sigma Cyber 5500 DVI (vX.XX), click “OK”.
Note
"
To install the SIGMA CYBER 5500 DVI in Windows NT 4.0, you should have Service
pack 3 or higher.
Summary of Contents for CYBER 5500 II DVI
