Operating Manual SIGMA 2-16PK
page 29 of 77
05/2007
5.2 Initial
Start-Up
Before the initial start-up, please ensure that your centrifuge is properly set
up and installed
(see 4.2 "Installation", page 24).
5.2.1
Switching the Centrifuge ON
•
Press the mains power switch on the right side of the front (see Fig. 5.1, page
25).
The centrifuge display then illuminates.
5.2.2
Opening and Closing the Lid
The lid can be opened if the centrifuge is at a standstill and if the lid key is
illuminated.
•
Press the lid key in order to open the lid (see 5.3.8 "Activating/Deactivating
the Automatic Lid Opening Function", page 45).
The centrifuge cannot be started if the lid is opened.
•
To close the lid, press on the lid so that the lid lock audibly locks into place.
)
Attention!
A flashing lid key indicates that the lid lock has not locked.