9
This completes the ‘Scaling’ section. Press
to save any changed values and return to the ‘Main Menu’
Screen. As previously described, enter the MENU selection and select the ‘SETPOINTS’ menu, where
process setpoints are entered. The first screen is the bearing warning setpoint.
Use
to change or press
to advance to the: Bearing Setpoint Screens.
Use
to change or press
to advance to the: Winding Setpoint Screens.
Use
to change or press
to advance to the:
Press the
to save values and return to the ‘Main Screen’.
This is the temperature which
brings up the ‘HOT’ alarm and
turns on the ‘Warn’ LED and
relay output.
This is the temperature which
brings up the ‘VERY HOT’
alarm and turns on the
‘Alarm” LED and relay
output.
This is the temperature which
brings up the phase ’HOT’
alarm and the turns on the
Alarm LED and the relay
output.
This is the temperature which
brings up the phase ‘VERY
HOT’ alarm and turns on the
Alarm LED and the relay
output
.
Summary of Contents for 700 MM
Page 6: ...6...
