11
Press
to advance to the log interval time settings.
NOTE
: This screen allows for setting the log interval. As shown the unit will take a reading every 5
seconds.
Logging may also be started and stopped by connecting a dry contact between DI1 and digital
common. It is necessary to remove the screen panel to access this terminal block. Logging
occurs whenever these points are closed.
THE DIAGNOSTIC SCREEN
The final menu item is ‘DIAGNOSTICS’. This screen provides real time information about the current
status of both inputs and outputs.
NOTE:
Only digital input (1) is used in the 700MM.
This is the Relay
Output status.
Shown is Relay
1 and Relay 2
Active. The 8
inputs are shown
the same way.
Summary of Contents for 700 MM
Page 6: ...6...
