22
Quick Start
Figure 3
4.
As it shows in figure 4, click the “Upgrade” to start upgrading. The instrument will run the upgraded
software as soon as the upgrading completed.
Figure 4
Upgrade via the Guiding Procedure
Upgrading via the guiding procedure can be used if the upgrading method above failed.
Specific steps:
1.
Pressing the knob prior to power on the instrument to enter the guiding procedure mode.
2.
As shown in figure 2, select the “Firmware Mode” option instead and the following upgrading steps
are the same as method 1.
Summary of Contents for SPD3303C Series
Page 1: ...SPD3303C Series Programmable DC Power Supply Quick Start EN_02A...
Page 2: ......
Page 12: ...10 Quick Start...
