Quick Start 19
CH1/CH2 Parallel Mode
Instruction:
In the parallel mode, CH1 and CH2 are linked internally into one channel controlled
by CH1. The output current value is twice as much as the single channel.
Output ratings
0~32V/ 0~6.4A
Operation steps:
1.
Press the
button to start Parallel mode, and the indicator light turns bright immediately
；
2.
Connect the load to the positive and negative terminals of CH1
；
3.
Press
button to open the output and the indicator light turns bright.
Turn on CH1 and set its output voltage/current value by revolving the multi-function knob. In the
default setup, the instrument works in “Coarse”, you could turn to “Fine” by pressing
button.
Note:
You can identity the current working state “CC” or “CV” refer to the indicator light.(red means
CV, green means CC). In parallel mode, CH2 only works in CC mode.
Summary of Contents for SPD3303C Series
Page 1: ...SPD3303C Series Programmable DC Power Supply Quick Start EN_02A...
Page 2: ......
Page 12: ...10 Quick Start...
