PSA Installation Guide
9
PowerSync
Analyzer Installation Guide Copyright © 2007-2012 Sifos Technologies, Inc., All Rights Reserved
The PSA-2400 RackPack PowerSync Analyzer package is shipped with the following items:
Two PSA chassis with 24 PSE test ports per chassis
Software and documentation provided on a CD
AC power cord
Two CAT5 Ethernet cables, straight-through (beige)
RS232 Straight-through cable with DB9M to DB9F connections.
Safety Precautions
TO PREVENT ELECTRIC SHOCK, DO NOT REMOVE THE COVER OF THE PSA. NO USER
SERVICEABLE PARTS ARE INSIDE. SERVICE SHOULD BE REFERRED TO QUALIFIED PERSONNEL.
THE PSA SHOULD BE POWERED DOWN AND DISCONNECTED FROM AC LINE VOLTAGES WHEN
ANY OF THE CARD SLOTS ARE UNPOPULATED OR UNCOVERED BY A BLANK FACEPLATE, AND
WHEN INSTALLING OR REMOVING CARDS OR FACEPLATES.
THE PSA-1200-BASED PSEAF-2 CARDS MAY EXCEED SAFE HANDLING TEMPERATURES WHEN
OPERATING UNDER HEAVY CURRENT LOADS. CARDS SHOULD ALWAYS BE ALLOWED TO COOL
BEFORE REMOVAL FROM THE CHASSIS.
THE PSA IS FOR CONNECTION ONLY TO THE INTERNAL BUILDING ETHERNET NETWORK. IT IS
NOT FOR CONNECTION TO THE TELECOMMUNICATIONS NETWORK.
THE PSA SHOULD BE POWERED VIA THE SUPPLIED AC POWER CORD, WHICH INCLUDES AN
EARTHING CONDUCTOR. THE GROUND TERMINAL OF THE PLUG SHOULD NOT BE MODIFIED,
SINCE THIS COULD RESULT IN A PRODUCT THAT IS NOT PROPERLY EARTHED. WHEN PLACING
THE EQUIPMENT IN ITS FINAL CONFIGURATION, THE EQUIPMENT SHOULD BE PLACED SUCH
THAT IT IS EASY TO ACCESS THE POWER CORD; THIS WILL ALLOW THE CORD TO BE PULLED
OUT OF THE UNIT IN THE EVENT THAT IT IS NECESSARY TO REMOVE POWER.
THERE ARE VENTILATION HOLES ON THE TOP AND BOTTOM COVERS, AND FAN VENT HOLES ON
THE BACK OF THE PSA-1200 AND PSA-2400 RACK-MOUNT CHASSIS, AND ON THE SIDES AND TOP
OC THE PSA-100. THESE SHOULD NOT BE BLOCKED OR OTHERWISE OBSTRUCTED.
WARNING: THE PSA-100 SHOULD ONLY BE OPERATED WITH THE POWER SUPPLY
THAT WAS PROVIDED WITH THAT PRODUCT.