Sifos Technologies PowerSync PSA-PL Installation Manual Download Page 2

PSA Installation Guide

 

 

PowerSync

 Analyzer Installation Guide  Copyright © 2007-2012 Sifos Technologies, Inc., All Rights Reserved 

 

Sifos Technologies, Inc. 

(978) 640-4900 Phone 
(978) 640-4990 FAX 
 

Disclaimer 

 
The information contained in this manual is the property of Sifos Technologies, Inc., and is furnished for use by 
recipient  only  for  the  purpose  stated  in  the  Software  License  Agreement  accompanying  the  user  documentation.  
Except  as  permitted  by  such  License  Agreement,  no  part  of  this  publication  may  be  reproduced,  stored  in  a 
retrieval  system,  or  transmitted,  in  any  form  or  by  any  means,  without  the  prior  written  permission  of  Sifos 
Technologies, Inc. 
 
Information  contained  in  the  user  documentation  is  subject  to  change  without  notice  and  does  not  represent  a 
commitment on the part of Sifos Technologies, Inc.  Sifos Technologies, Inc. assumes no responsibility or liability 
for any errors or inaccuracies that may appear in the user documentation. 
 

Warrantee 

 
Sifos  Technologies  Inc.,  warrants  to  recipient  that  hardware  (“Hardware”)  and  the  tangible  media  on  which  it 
supplies  Software  will  be  free  from  significant  defects  in  materials  and  workmanship  for  a  period of  12  months 
from  the  date  of  delivery  (the  “Warrantee  Period”),  under  normal  and  intended  use  and  conditions.    Sifos  also 
warrants  that  during  the  Warranty  Period,  the  Software  that  it  supplies  will  operate  substantially  in  accordance 
with the specifications supplied by Sifos for such Software.  Sifos does not warrant that the functions contained in 
the Software will meet a specific requirement or that the operation will be uninterrupted or error free.  Sifos shall 
have no warranty obligations whatsoever with respect to any Software which has been modified in any manner by 
any third party.    
 
Defective Product under warranty shall be, at Sifos’ discretion, repaired or replaced or a credit issued for an amount 
equal to the price paid for such Product provided that:  (a) such Product is returned to Sifos Technologies after first 
obtaining  a  return  authorization  number  and  shipping  instructions,  freight  prepaid,  to  Sifos’  location  in  the  United 
States;  (b)  Recipient  provides  an  explanation  of  the  defect  or  Software  failure  claimed;  and  (c)  the  claimed  defect 
actually  exists  and  was  not  caused  by  fault,  neglect,  accident,  misuse,  improper  storage,  improper  installation, 
improper  repair  (other  than  by  Sifos  or  its  agents),  fire,  flood,  lightning,  power  surges,  earthquake  or  alteration 
(unless  such  alteration  performed  by  Sifos  or  its  agents).  Sifos  will  ship  repaired  Products  to  recipient,  freight 
prepaid, within ten (10) working days after receipt of defective Product.    Except  as  otherwise  stated,  any  claim  on 
account of defective materials or for any other cause whatsoever will conclusively be deemed waived by recipient 
unless  written  notice  thereof  is  given  to  Sifos  Technologies,  Inc.  within  the  Warrantee  Period.    Product  will  be 
subject to Sifos Technologies’ standard tolerances for variations. 
 
TO THE EXTENT PERMITTED BY APPLICABLE LAW, ALL IMPLIED WARRANTIES, INCLUDING BUT 
NOT  LIMITED  TO  IMPLIED  WARRANTEES  OF  MERCHANTABILITY,  NONINFRINGEMENT  AND 
FITNESS FOR A PARTICULAR PURPOSE, ARE HEREBY EXCLUDED, AND THE LIABILITY OF SIFOS, 
IF  ANY  FOR  DAMAGES  RELATING  TO  ANY  ALLEGEDLY  DEFECTIVE  PRODUCT  SHALL  BE 
LIMITED TO THE ACTUAL PRICE PAID BY THE PURCHASER FOR SUCH PRODUCT.  IN NO EVENT 
WILL  SIFOS  TECHNOLOGIES  BE  LIABLE  FOR  COSTS  OF  PROCUREMENT  OF  SUBSTITUTE 
PRODUCTS OR SERVICES, LOST PROFITS, OR ANY SPECIAL DIRECT, INDIRECT, CONSEQUENTIAL 
OR INCIDENTAL DAMAGES, HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, ARISING IN 
ANY WAY OUT OF THE SALE AND/OR LICENSE OF PRODUCTS OR SERVICES TO RECIPIENT EVEN 
IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES AND NOTWITHSTANDING ANY FAILURE OF 
ESSENTIAL PURPOSE OF ANY LIMITED REMEDY. 

Summary of Contents for PowerSync PSA-PL





















Reviews: