7
42445 Avenida Alvarado, Temecula, CA 92590
(800) 451-9343, www.nimbuswater.com
Note: This faucet requires a 1¼" opening in the sink or countertop.
1. Locate the faucet parts bag and arrange the parts on the
countertop in the sequence shown.
2. The last part in the sequence, the quick connect adapter (6), will
be found in the smaller parts bag.
3. Pull the white, yellow and blue tubing up through the faucet hole
in the sink.
4. Insert polished faucet base and rubber seal onto base of
faucet.
5. Push the 1/4” yellow drain tubing onto the 1/4” barb fitting. This
tube must be of sufficient length to reach the yellow drain connection
on the manifold.
6. Push the white 3/8” tubing onto the larger 3/8” barbed fitting,
being sure you have enough tubing to reach the drain saddle.
7. Slide white plastic spacer open-end-up onto the threaded faucet
stem (2). Note: This spacer may be omitted it faucet is installed in a
granite countertop (or countertop with similar thickness).
8. Thread the 3/8" washer (3), serrated washer (4) and mounting
lock nut (5) onto the threaded stem.
9. Thread faucet quick-connect adapter (6) on to threads of faucet
stem. NOTE: This connection should be hand-tightened only. Push
one end of 3/8" blue tubing into 3/8" connection.
10. Insert tubing and faucet assembly down through the sink hole.
11. Position the faucet to the desired handle orientation. Slip the
slotted washer (1) between the white plastic spacer and the sink.
Securely tighten the mounting nut.
12. Connect the white 3/8” tubing to the drain saddle assembly using
the drain connector nut supplied. This tubing should follow as direct
a path as possible; long runs, looping or deep sags will restrict normal
brine flow to the drain. Save the
unused portion of the tubing for the installation of the storage tank.
10. Firmly insert spout assembly into
the top hole of faucet body
(approximately 1/4"). You may swivel the faucet left or right.
Push Handle Airgap Faucet
System to airgap drain
(1/4" yellow tubing)
Faucet to drain saddle
(3/8" white tubing)
Product water
(3/8" blue tubing)
Metal base plate
Rubber seal
1
2
3
5
6
4