Sierra Instruction Manual
InnovaSonic
®
203 Economical
37
which is lower than the low value, will activate the
alarm in the OCT hardware or Relay output signal.
Alarm #1 High Value
Enter the high alarm value. Relevant alarm is turned
on in Menus M78 and M79; any of the measured flow,
which is higher than the high value, will activate the
alarm in the OCT hardware or Relay output signal.
Alarm #2 Low Value
Enter the low alarm value. Relevant alarm is turned on
in Menus M78 and M79; any of the measured flow,
which is lower than the low value, will activate the
alarm in the OCT hardware or Relay output signal.
Alarm #2 High Value
Enter the high alarm value. Relevant alarm is turned
on in Menus M78 and M79; any of the measured
flow, which is higher than the high value, will activate
the alarm in the OCT hardware or Relay output signal.
Beeper Setup
Set up the beeper on-off state.
0. ON
Beeper ON
1. OFF
Beeper OFF
OCT Output Setup
Set up the output trigger event sources of the OCT
hardware output components.
The following signal options are available:
1.
Not Ready(NO*R)
2.
Alarm #1
3.
Alarm #2
4.
NET Int Pulse
5.
Energy Pulse
6.
FO
Ala r m # 1 L o w Va lu e
0 m3 / h
Ala r m # 1 Hi g h Va lu e
14 4 0 0 m3 / h
Ala r m # 2 L o w Va lu e
0
m3 / h
Ala r m # 2 Hi g h Va lu e
14 4 0 0 m3 / h
BEEPER Se t u p [ 7 7
0 .
ON
OCT Ou t p u t Se t u p [ 7 8
0 . No t Re a d y ( NO* R)
