SIERRA VIDEO SYSTEMS Tahoe 2010A, User Manual

Page: 16 / 66

Sierra Video Systems
10
Connecting To Video Devices
Video sources and output devices (such as monitors, or recorders) may be connected to
the routing switchers through the BNC type connectors located on the back of the unit.
Keep in mind that the output signal format will be that of the input signal format.
All signal connections that use more than one cable interconnecting between devices
should be of equal timing length (example: cables between a camera and the switcher
should have the same time delay).
Unused outputs do not need to be terminated.
Connecting To Audio Devices
Audio sources and output devices (such as amplifiers or recorders) are connected to the
switchers through 15 pin D connectors located at, and marked, on the rear of the
switcher.