13
INSTALLATION- BUILT-IN
1.
Select a locat ion t hat is not prone t o
moist ure and is located at least 0.91m or 3
feet away from combust ible mat erials such
as curt ains or drapes, furnit ure, bedding,
paper, et c.
2.
M ark t he desired locat ion on t he floor and
st ore appliance in a safe, dry and dust free
locat ion.
3.
Prepare a wall w it h a framed opening t o
accommodat e t he size of your unit . Leave at
least 1/4
”
(6 mm) around t he edge of t he
appliance. Any new w iring must be done in
compliance w it h local and nat ional codes
and ot her applicable regulat ions.
Note
: Fireplace must st ick out of t he wall a
minimum of 1/2
”
or 1.5 cm.
Prior to installing the appliance, test to make
sure the appliance operates properly by
plugging the pow er supply cord into a
conveniently located 120 Volt grounded
outlet.
The rough wall opening size of t he fireplace:
W(
“
)
D(
“
)
H(
“
)
WM -FM L-26-3223-STL
27
6 1/2
20 1/2
WM -FM L-34-4023-STL
35
6 1/2
20 1/2
WM -FM L-48-5523-STL
49
6 1/2
20 1/2
WM -FM L-60-6623-STL
60 5/8
6 1/2
20 1/2
WM -FM L-72-7823-STL
72 1/2
6 1/2
20 1/2
WM -FM L-88-9623-STL
89 1/2
6 1/2
20 1/2
1.
Take the front panel off from the unit. Put the
brackets on the both sides and top of the fireplace
as shown blew.
2.
Lift fireplace and insert int o opening.
3.
M ake sure t hat t he power supply port is not
behind t he wall.
4.
Level t he fireplace.
5.
Drive mount ing screws int o t he mount ing
bracket s on t he unit and t he wall st uds.
6 Replace the front panel and plug in back-
.
-lighting LED. See page 11.
Summary of Contents for WM -FM L-26-3223-STL
Page 20: ...20 EXPLODED VIEW ...
Page 23: ...23 ...
