SAC 3600 Fingerprint Reader User’s Manual
7
1
VIN (DC 9-12V input)
Red
2
GND (power supply grounding)
Black
3
WD0 (Wiegand output D0)
Green
4
WD1 (Wiegand output D1)
White
5
HOLD (Wiegand output interrupt, effective
low level)
Brown
6
ALARM (alarm output interrupt, effective
low level)
Yellow
7
TX232 (RS-232 communication output)
Purple
8
RX232 (RS-232 communication input)
White
9
GND (numerical, same to power supply
grounding)
Black
10
NC (relay’s constantly closed contact)
1A/12V contact
Blue
11
NO (relay’s constantly opened contact)
1A/12V contact
Gray
12
COM (relay’s common contact) 1A/12V
contact
Orange
SK1
OFF - close alarm function; ON - open
alarm function
wave switch
KEY
anti-temper switch; release to alarm,
press to cancel alarming
touch switch
Table 6-1
VII. Specification on displayed English letters
1. Finger
(fingerprint management)
1 REG FP (register fingerprint)
1. User (general user)
Register
ID:_ (input the fingerprint number to register)
2. Master
Register
ID:_ (input the administrator’s fingerprint number to register)
2. CHG FP (change fingerprint)
Change
ID:_ (input the fingerprint number to change)
3. DEL FP (delete fingerprint)
Delete
ID:_ (input the fingerprint number to delete)
4. CLR FP (clear fingerprint)
Delete
All FP? (Delete all fingerprints? Press # to confirm, or any key to cancel)
2. Card
(card number management)
1. REG ID (register card number)
Card:_ (input the card number to register, or use the card or directly press
numerical keys to input)
