SAC 3600 Fingerprint Reader User’s Manual
11
IV. Card management
Enter the subdirectory to choose 2. Card to enter the secondary menu, which includes:
1. REG ID (register ID card), 2. LST ID (browse ID card), 3. DEL ID (delete ID card), and
4. CLR ID (clear ID card).
4.1 Register card user
Select 1. REG ID. Press # key and the screen hints to slash the ID card on the
keyboard zone of the reader. The display reveals number of this ID. Press # key again to
complete registration. The successfully registered ID card could be used outside the
keyboard zone by 1~5 cm.
4.2 Browse ID card
Select 2. LST ID. Press # key and the display reveals registered ID cards in the reader.
Press 9/0 to turn up/down and browse all the registered IDs.
4.3 Delete ID card
Select 3. DEL ID. Press # key and press 9/0 to turn up/down and browse all the
registered IDs.in the reader. Choose ID cards to delete and press # key to delete.
4.4 Clear ID card
Select 4. CLR ID. Press # key and the screen hints the user whether or not to clear
all ID card users. Press # key to clear all ID card users and press * to quit without
deleting.
V. Setting of relay delay time
The delay time of relay refers to the duration of relay output after fingerprint
analysis/use of ID card. The range of setting is 1~999 seconds.
Enter the subdirectory and choose 3. RLY TM. Press # key and the screen hints to
input a figure between 0~999. Press # to confirm.
VI. Setting of collection mode
Enter the subdirectory and select 4. CP MOD. Press # key and there will be two
Card:_
Card:_
Card:_
Card:_
Card:002227
Card:002227
Card:002227
Card:002227
0077
0077
0077
0077
Delete
Delete
Delete
Delete
ALL ID?
ALL ID?
ALL ID?
ALL ID?
Relag On
Relag On
Relag On
Relag On
TM:5- S
TM:5- S
TM:5- S
TM:5- S
