background image

8

plate of residual water or calcium buildup in system before use.

NOTE: Some garments have details such as darts, curved seams, and shoulder pads 

which should not be pressed 

fl

 at. Use pressing cushion provided for use in these areas.

Warning: Do not attempt to lower the pressing plate to its lowest position 

or lock the press with the pressing cushion in between.  You may damage your 

press by doing so.

BASIC IRONING

Tablecloth: 

Fold the length of fabric in either half or thirds and place on 

the ironing board.
Accordion pleat the length on the ironing board and move 

the pleated item into the large open space behind the ironing 

board.

Move the tablecloth towards you, then press.
Continue moving forward until the entire item is pressed.
To store, fold it, place it on the ironing board and close the 

press. Apply minimal pressure.  If necessary, refold the 

tablecloth to press any areas that were hanging off the 

sides of the ironing board.  Repeat the pressing procedure. 

Hint: Use the same method for most large items, such as duvet covers, bed sheets, 

pillowcases, table runners, towels, blankets, quilts, etc.

Pants:

Waistband- Place the top of pants on the press. Press the 

pressing board down over the pants to the ironing board. 

If using pressing cushion, place the waistband of the pants 

around the board on top of cushion. Arrange pleats. Rotate 

pants to press entire waistband.
Side Pockets- Slide pockets over the pressing cushion over 

the pressing board then press.

Summary of Contents for SSP-4015

















Reviews: