6
Warning: During initial use or after a long period of time without use, press
the steam burst button continuously for several seconds to clear pressing plate
of residual water or calcium buildup in system before use.
CAUTION: Be sure to examine garment label before selecting a fabric setting. If
you cannot determine a fabric type, select lowest setting and increase as needed. It
is best to start with the most delicate fabrics fi rst to avoid damage to your fabric.
6) A single beep will sound once press has reached desired temperature allowing you to
start pressing. Be sure to use provided pressing cushion (Q) to
fl
atten out gathered
areas such as sleeves, darts and yokes. If needed, use spray bottle (P) for dampening
fabric before pressing.
7) Pull down pressing handle (I) and press the pressing plate (K) and the ironing
board (M) together. Hold for a few seconds, then lift to separate the pressing plate
(K) and ironing board (M).
IMPORTANT: Press on/off button to cancel your selected pressing cycle.
8) To use steam, adjust the fabric temperature selection arrows (A) to the wool, cotton
or linen settings. The steam ready light (F) (yellow) will appear when and you will be
able to press the steam burst button (J) for steaming your garments.
9) Pull down pressing handle directly above garments about 1 to 2 inches above fabric
and press steam burst button (J). Press garment. DO NOT activate steam burst button
(J) with unit completely closed; you may damage your press. An automatic vacuum
will initiate once the steam burst button (J) is pressed and will stay on for 5 seconds
after the steam burst button (J) is released.
7