4
5) Push the Water Tank Release Lock backward to take out the Water Tank,
unscrew the water tank cap, fill with cool tap water, tightening the cap,
replace the Water Tank back to the unit.
NOTE: Do not operate without a floor cloth in place.
6)
Twist the Quick Release Cord Wrap clockwise to unwrap the Power cord
completely, hang the Cord on the Handle Cord Wrap for better use of the
Steamer when moving and cleaning, plug into a grounded outlet.
7) The LED will illuminate when the steamer is ready for cleaning.
NOTE: It is recommended that another high wattage appliance is not
operated on the same circuit to avoid a circuit overload.
CAUTION: When using steamer for first time, please hold trigger in
for approx 30 seconds to prime the unit.
8) Slowly pass over surface to be cleaned while pressing trigger to emit
steam. It is recommended to sweep or vacuum floor prior using the steamer.
CAUTION: TO SANITIZE AN AREA OF YOUR FLOOR, LEAVE THE
STEAMER OVER THE AREA FOR A MINIMUM OF 8 SECONDS, BUT NO
LONGER THAN 15 SECONDS. LEAVING THE STEAMER STATIONARY
POSITION FOR A LONGER PERIOD THAN RECOMMENDED MAY CAUSE
THE BUILD UP OF A PALE RESIDUE. THIS RESIDUE CAN BE REMOVED
BY USING A DECALCIFYING PRODUCT OR WITH A FEW DROPS OF
VINEGAR. (SEE TROUBLESHOOTING GUIDE)
