Safety instructions
10
Building Technologies
A6V10257473_b_en_--.doc
Fire Safety & Security Products
01.2010
Avoid the inopportune release of RT-alarm
Inform the reception station before an RT-alarm test
Installation and commissioning shall be performed by trained personal
Product operation check
Inform the personnel of the formation of a smoke cloud and presence of noise
Inform the personnel before alarm devices check and anticipate possible panic
reactions
Warn the alarm reception centers and the fault reception stations connected to
the system before carrying out the tests
Design modifications of systems and products
Modifications to the system and to individual products may lead to faults,
malfunctioning and safety risks
Intended system modifications or extensions require written approval from
Siemens and the relevant safety authorities
Components and spare parts
Components and spare parts must comply with the technical specifications
defined by Siemens. Only use products recommended or prescribed by Siemens
Only use fuses with the specified fuse characteristics
Wrong battery types and improper battery changing lead to a risk of explosion.
Only use the same battery type or an equivalent type recommended by Siemens
Batteries must be disposed of in an environmentally friendly manner. Country
specific directives and regulations must be observed. They must be deposited at
the collection places assigned to this purpose.
Note that the cylinders containing the extinguishing agent are under pressure
and that they must consequently be replaced in accordance with the safety
instructions in force
Disregard of the safety regulations
Before they are delivered, products are tested to ensure they function correctly
when used properly. Siemens disclaims all liability for damage or injuries caused
by the incorrect application of the instructions or the disregard of danger warnings
contained in the documentation. This applies in particular to:
Personal injuries or damage to property caused by improper use and incorrect
application
Personal injuries or damage to property caused by disregarding safety
instructions in the documentation or on the product
Personal injury or damage to property caused by poor maintenance or lack of
maintenance
2.3
Standards and directives complied with
A list of the standards and directives complied with is available at your Siemens
contact partner.
