Operating the appliance
en
17
Change the programme
default settings
You can use the displayed programme
presettings or adjust them.
To do this, repeatedly press the
corresponding button until the required
setting is displayed.
The settings are activated without
needing to be confirmed. They are not
saved when the appliance is switched
off.
Programme default settings
~
Page 15
Select additional programme
settings
By selecting additional settings, you can
better adapt the washing process to
your items of laundry.
The settings can be selected or
deselected depending on the
programme progress.
The indicator lamp for the button lights
up if a setting is active. The settings are
not saved when the appliance is
switched off.
Additional programme settings
~
Page 16
Placing laundry into the drum
:
Warning
Danger of death!
Items of laundry pretreated with
cleaning agents that contain solvents,
e.g. stain remover/cleaning solvent,
may cause an explosion after being
loaded into the washing machine.
Hand-rinse these items of laundry
thoroughly beforehand.
Notes
■
Mix items of laundry of varying sizes.
Laundry items of different sizes
distribute themselves better during
the spin cycle. Individual laundry
items may cause an unbalanced
load.
■
Observe the maximum specified
load. Overfilling adversely affects
the washing result and promotes
creasing.
1.
Unfold presorted laundry items and
place in the drum.
2.
Ensure that no laundry items are
trapped between the washing
machine door and rubber seal.
3.
Close the washing machine door.
The indicator light on the
!
Start/
Reload
button flashes and the default
settings for the programme appear
continuously on the display panel.
Changes may be made to the default
settings.