manualshive.com logo in svg

Siemens WS10K260HK, Instructions Manual, Page: 16 / 40

Share
Download
Siemens WS10K260HK Instructions Manual Download Page 16

en

    Additional programme settings

16

4.

Press the 

!

 

Start

/Reload button. 

The preselected time continues to 

run.

\

Additional programme 

settings

Additional programme settings 

speedPerfect

For a shorter wash time with a 

comparable washing effect to the 

standard programme. 

Note:  

Do not exceed maximum load.

Overview of programmes 

~

 Page 12

EcoPerfect

For saving energy with a washing result 

comparable to that of the standard 

programme.

Extra Rinse

Increased water level and additional 

rinse cycle, extended washing time. For 

areas with very soft water or for an even 

better rinsing result.

1

Operating the 

appliance

Operating the appliance

Note:  

Install

 and 

connect

 washing 

machine properly. 

~

 Page 31

Before the 1st wash, wash once 

without

 any washing. 

~

 Page 36

Preparing the washing 

machine

Notes

■

Never switch on a damaged 

washing machine!

■

Inform customer service!

~

 Page 28

1.

Insert mains plug.

2.

Turn the tap on.

3.

Open the washing machine door.

4.

Check that the drum is completely 

drained. Drain if necessary.

Select programme/switch on 

the appliance

Note:  

If you have activated the 

childproof lock, you must deactivate it 

before you can set a programme. 

Use the programme selector to select 

the required programme. Can be 

rotated in either direction.
The washing machine is switched on. 

The following figures are indicated 

continuously on the display panel for 

the selected programme:

■

the programme duration,

■

the preset temperature,

■

the preset spin speed and

■

the maximum load.

Summary of Contents for WS10K260HK









































Reviews:

No comments