Siemens WMH6Y899DN Instruction Manual And Installation Instructions Download

Page: 34 / 72

Overview of programmes

Shirts / Business

Non-iron shirts or blouses made of cotton, linen, synthetic fibres or

blended fabrics

Notes

■

Shirts/blouses are only given a short spin on the

Less ironing

(

) setting. Hang them up to dry while still drip-

ping wet. –> Self-smoothing effect

■

Use the

Delicate / Silk

programme to wash shirts/blouses

made of silk or delicate fabrics.

Max. 2 kg

- 60 °C

0-800** rpm

(

Detergent

, fabric softener

Down Wear

Machine-washable fabrics stuffed with down, such as pillows and

duvets; also suitable for items stuffed with synthetic fibres

Note: .

Wash large items separately. Use a detergent designed for

delicates and follow the instructions on the item's care label. Use

detergent sparingly.

Max. 2 kg

- 60 °C

0-1200** rpm

(

Detergent -, fabric softener -

Curtains

3.5 kg heavy curtains or 25-30 m² lightweight drapes

Notes

■

Shorter rinse and final spin cycles.

■

Use a detergent that is suitable for machine-washing curtains.

■

The

Prewash

(

) button is set by default. If you do not require

a pre-wash cycle, press the button to deactivate the function.

Max. 3.5 kg

- 40 °C

0-800** rpm

(

Detergent

, fabric softener

Drum clean

Programme for cleaning and caring for the drum and the outer tub,

e.g. before running the first wash cycle, if washing frequently at a

low temperature (40 °C or lower) or if an odour has developed after

a prolonged period of non-use. The

Drum clean

indicator lamp

flashes when you use have not used a programme of 60 °C or

higher for a long time.

Notes

■

Run the drum-care programme without any laundry.

■

Use washing powder or a detergent that contains bleach. To

prevent foaming, only use half the amount of detergent

recommended by the detergent manufacturer. Do not use

detergents that are intended for woollens or delicates.

0 kg
80, 90 °C
1200 rpm

Detergent -, fabric softener -

Programme/type of laundry/instructions

Settings

* The programmes and additional programme settings are model-dependent. The programmes/settings

that are available can either be selected directly in the control panel or under

Others

Programmes or

Options

(

** Max. The maximum spin speed depends on the model and programme

*** Reduced load for the

speedPerfect

(

setting

Summary of Contents for WMH6Y899DN









































































Search results

Summary of Contents for WMH6Y899DN

Reviews:

Related manuals for WMH6Y899DN

Brands by name

Popular brands

Siemens WMH6Y899DN, Instruction Manual And Installation Instructions

Search results

Summary of Contents for WMH6Y899DN

Reviews:

Related manuals for WMH6Y899DN

Brands by name

Popular brands