Siemens WMH6Y899DN Instruction Manual And Installation Instructions Download

Page: 45 / 72

Operating the appliance

Adding laundry

After starting the programme, you can

add or remove laundry if necessary.
Press the

button to do this.

The

button indicator lamp flashes

and the machine checks whether it is

possible to add laundry.
It is possible to add laundry when

Pause: Reload is possible

appears on

the display.

To continue the programme, press the

button. The programme continues

automatically.

Notes

■

Do not leave the door open for too

long when adding laundry as water

from the laundry may leak out.

■

For safety reasons, the door remains

locked when the water level or

temperature is high, or while the

drum is turning, and it is not possible

to add laundry during this time.

Follow the information on the display

panel.

■

The load display is not active during

reloading.

Changing the programme

If you have started the wrong

programme by mistake, you can

change the programme as follows:

Press the

button.

Select another programme.

Press the

button. The new

programme starts from the

beginning.

Cancel the programme

For programmes at high temperatures:

Press the

button.

To cool down laundry: Select

Rinse

Press the

button.

For programmes at low temperatures:

Press the

button.

Select

Spin

Drain

Press the

button.

Programme end during rinse

hold

The following appears on the display

panel:

Continue the programme by:

■

Select the

Spin

(change the spin

speed if necessary) or the

Drain

programme.

■

Press the

button.

Programme end

Finished, remove washing

appears

on the display panel. The

button

indicator lamp is off.

6HOHFWVSLQRUGUDLQ

5LQVHKROGUHDFKHG

DQGWKHQVWDUW

6SLQ

'UDLQ

Summary of Contents for WMH6Y899DN









































































Search results

Summary of Contents for WMH6Y899DN

Reviews:

Related manuals for WMH6Y899DN

Brands by name

Popular brands

Siemens WMH6Y899DN, Instruction Manual And Installation Instructions

Search results

Summary of Contents for WMH6Y899DN

Reviews:

Related manuals for WMH6Y899DN

Brands by name

Popular brands