Intelligent dosing system
en
33
Base dosage
The basic dosages are:
■
For
detergents
– based on the
manufacturer’s recommendation for
average soiling and the respective
water hardness.
■
For
fabric softeners
– based on the
manufacturer's recommendation for
a medium level of softness.
Refer to the packaging label of your
detergent/fabric softener or ask the
manufacturer directly for this
information.
To find out the hardness of your water
supply, use a test strip or check with
your water supplier.
My water hardness:
Below is an example of detergent
dosages on a packaging label:
The default setting for the basic dosage
is set specifically according to the area
in which you live (e.g. 75 ml for
detergent and 36 ml for fabric softener).
To achieve optimum washing and
rinsing results, please set your basic
dosage depending on your detergent,
the water hardness in your area and the
fabric softener you use.
Notes
■
Reduce the basic dosage if using a
very concentrated detergent.
■
If large amounts of foam are
repeatedly created during washing,
please check your basic dosage and
dosage strength settings.
Certain types of liquid detergent can
also create excessive amounts of
foam. If your basic dosage and
dosage strength settings are correct,
we advise you to use a different
detergent.
Changing the basic dosages:
Dispenser content for
i-Dos
i
I
ô
Instead of fabric softener, a second
liquid detergent can be used in the i-
Dos
i
I
ô
dispenser.
Notes
■
When switching the i-Dos
i
I
ô
dispenser content from
fabric
softener to detergent
, the basic
dosage for detergent is set to factory
settings for this dispenser and the
dosage for this detergent is set to
off
for all programmes in which
intelligent dosing can be used. Then,
using the i-Dos
i
I
ô
button on the
display panel, select the detergent
dosage (low, medium or high).
■
The i-Dos
ô
dispenser is
automatically deactivated if
detergent dosing is activated for the
i-Dos
i
I
ô
dispenser.
The settings for this programme are
saved until they are changed.
■
When switching the i-Dos
i
I
ô
dispenser content to
fabric softener
,
the basic dosage is set to factory
settings and the dosage is set to
"normal" for all programmes in which
intelligent dosing can be used.
Degree of
soiling
→
Water
hardness
↓
light
normal
heavy
very heavy
soft/medium
55 ml
75 ml
120 ml 160 ml
hard/very hard 75 ml
95 ml
150 ml 180 ml
