Siemens WM12UT61ES User Manual And Assembly Instructions Download Page 48

Page: 48 / 60

Troubleshooting

Fault

Cause

troubleshooting

The filters in the water inflow
are blocked.

▶

"Clean the filters in the water in-
flow"

→

Page 44

The tap is turned off.

▶

Turn on the tap.

The water inlet hose is
kinked or jammed.

▶

Ensure that the water inlet hose is
not kinked or jammed.

flashes.

The automatic voltage con-
trol system detects an unau-
thorised voltage under-us-
age.

▶

No remedial action possible.

Note:

If the power supply is stable, the

programme continues to run as nor-
mal.

flashes.

Voltage under-usage causes
a programme extension.

No remedial action possible.

lights up.

The temperature is too high.

▶

Wait until the temperature has
dropped.

▶

→

"Cancelling the programme",

Page 37

Water level is too high.

▶

Start the

programme.

Laundry is caught in the
door.

Open the door again.

Remove any trapped laundry.

Close the door.

Press

inicio pausa + carga

to start

the programme.

flashes.

Door is not closed.

Close the door.

Press

inicio pausa + carga

to start

the programme.

All other error codes.

Malfunction

▶

Call the after-sales service.

→

"Customer Service", Page 56

Malfunctions

Fault

Cause

troubleshooting

The appliance is not work-
ing.

The mains plug of the power
cord is not plugged in.

▶

Connect the appliance to the power
supply.

The circuit breaker is faulty.

▶

Check the circuit breaker in the
fuse box.

There has been a power cut.

▶

Check whether the lighting in your
kitchen or other appliances are
working.

The programme does not
start.

You have not pressed

inicio

pausa + carga

▶

Press

inicio pausa + carga

Summary of Contents for WM12UT61ES





























































Search results

Summary of Contents for WM12UT61ES

Reviews:

Related manuals for WM12UT61ES

Brands by name

Popular brands

Siemens WM12UT61ES, User Manual And Assembly Instructions

Search results

Summary of Contents for WM12UT61ES

Reviews:

Related manuals for WM12UT61ES

Brands by name

Popular brands