Faults and what to do about them.
en
47
Caution!
Water damage
Any escaping water may cause water
damage.
Do not open the door if water can be
seen through the glass.
1.
Switch off the appliance. Pull out the
mains plug.
2.
Drain the water
.
3.
Pull the emergency release
downwards with a tool and release.
The door can then be opened.
Information on the display panel
Indicator/symbol
Cause/remedy
®
off
The door is unlocked at the end of the program or when the program is paused if
more laundry can be added.
®
is continuously lit
■
While the program is in progress. Door locked.
■
Paused: Temperature too high. Wait until the temperature drops.
■
Paused: Spin speed too high. Wait until the drum comes to a halt.
■
Paused: Water level too high. It is not possible to add more laundry. Touch
Ü
to resume the program.
■
Is
$
selected (Rinse Stop = no final spin)?
®
is flashing
■
Slowly: The door cannot currently be locked or unlocked. Please wait.
■
Quickly: Close the door because water can flow out from the laundry.
Ü
off
At the end of the program, while the door is open
Ü
is continuously lit After the program has started
Ü
is flashing
Before the program starts, paused
|
is continuously lit Water pressure too low, may increase the program duration.
|
is flashing
The appliance is not being supplied with water:
■
Turn the tap on fully,
■
The supply hose is kinked/trapped,
■
Clean the filter if necessary.
w
3 sec is continu-
ously lit
The childproof lock is activated – deactivate it.
w
3 sec is flashing The childproof lock is activated – the program selector has been turned or the con-
trol panel touched.
