APOGEE Wireless User Guide
Chapter 2–About the Wireless Room Sensor Solution
Chapter 2 describes the features and overall functions of the Wireless Room Sensor Solution.
Why Use Wireless Room Temperature Sensor Communications?
Wireless communications between a room temperature sensor and TEC is a cost effective, reliable, and
fl
exible alternative to a hard-wired solution that differentiates our solutions from our competitors. For
example, in applications where wire must be run through conduit, electrician labor is expensive, and
architecture or building materials make running a cable dif
fi
cult, a Wireless Room Sensor Solution is an
attractive alternative.
•
Less cabling is required for room temperature sensor device installation. Low-impact installation
enables cost effective replacement of pneumatic and competitor equipment.
•
Easier installation and re-con
fi
guring spares facilities the dif
fi
culties associated with rewiring to
support new cable routing.
•
Factory installation of wireless transceivers by terminal box manufacturers further reduces
electrician involvement at installation time and reduces installation costs.
Hardware Components
The Wireless Room Sensor Solution is a wireless connection between P1 or BACnet TECs and room
temperature sensors that communicate via a radio frequency (RF) link instead of a hard-wired link. For
the Wireless Room Sensor Solution, a
Wireless Room Sensor (WRS)
communicates via point-to-point
wireless link to a
Room Sensor Transceiver (RSX)
device connected to a TEC device.
WLAN0091R2
s
Figure 1. WRS Communicating with RSX/TEC.
8
Revision Date: July 10, 2008
Siemens Building Technologies, Inc.
