en
Cleaning and maintenance
48
Filter in the water supply
blocked
Relieve the water pressure in the
supply hose first:
1.
Turn off the tap.
2.
Select any programme (except
Rinse/Spin/Empty).
3.
Start the programme.
4.
Allow the programme to run for
approximately 40 seconds, then
switch off the appliance.
5.
Pull out the mains plug.
Then clean the filter:
1.
Disconnect the hose from the tap.
2.
Clean the filter with a small brush.
3.
For standard and AquaSecure
models, clean the filter on the rear of
the appliance:
Disconnect the hose from the rear of
the appliance.
4.
For standard and AquaSecure
models, clean the filter on the rear of
the appliance:
a) Use pliers to remove the filter.
b) Clean the filter.
5.
Connect the hose and check for
leaks.
